Rain Sensor: Service and Repair

REMOVAL




1. Remove the cover first. Be careful not to damage the cover latch by applying excessive force. To remove the latch, pull aside the latch using the cover hole with the little (-) screwdriver.




2. When removing the rain sensor from coupler, remove the spring clip using the (-) screwdriver.
3. Remove the wiring harness connector from sensor.
4. Rain sensor module is attached to the front windshield with 2 stainless spring clips so that it can be easily replaced when replacing rain sensor module. When replacing the front windshield, remove the rain sensor module from the existing front windshield and install on the new front windshield.