Operation CHARM: Car repair manuals for everyone.
Home >> Kia >> 2005 >> Sedona V6-3.5L >> Repair and Diagnosis >> Body and Frame >> Bumper >> Front Bumper >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Bumper: Service and Repair

Front Bumper:






REMOVAL

1. Remove headlight and combination light assembly.




a. Remove three mounting bolts.
b. Disconnect electrical connector from rear of light assembly.

2. Remove bumper face and energy absorbent foam assembly.




a. Remove eight fasteners and four retaining bolts from top of bumper assembly.




b. Remove six fasteners and two bolts from bottom of bumper assembly.




c. Remove two screws from side of bumper assembly.
d. Disconnect electrical connector from fog light assembly.




3. Remove bumper reinforcement and bumper stay assembly.
- Remove four mounting nuts from front side of bumper reinforcement.

INSTALLATION

1. Install front bumper in reverse order of removal.

Tightening torque: Bumper mounting nut 10 - 15 N.m (1.0 - 1.5 kg.m, 7 - 11 lb.ft)
pro multis · About Operation CHARM