Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Intake Manifold: Specifications
Install the
intake manifold assembly with a new gasket to a
cylinder head assembly. Tighten the bolts in two steps.
Tightening torque: Step 1(a-h): 3.9-5.9Nm (0.4-0.6kgf.m, 2.9-4.3lb-ft) / Step 2(1-8): 18.6-23.5Nm (1.9-2.4kgf.m, 13.7-17.4lb-ft) CAUTION: When installing the gasket on the cylinder head, check the identification marks(LH/RH) not to be installed wrong.
