Spark Plug: Service and Repair
INSPECTION
1. Remove the ignition coil connector(A).
2. Remove the ignition coil(A).
NOTE:
When removing the ignition coil connector, pull the lock pin(A) and push the clip(B).
3. Using a spark plug socket, remove the spark plug.
CAUTION:
Be careful that no contaminates enter through the spark plug holes.
4. Inspect the electrodes(A) and ceramic insulator(B).
INSPECTION OF ELECTRODES
5. Check the electrode gap (A).
Standard : 1.0 - 1.1 mm (0.0394 - 0.0433 in.)
