Component Tests and General Diagnostics

INSPECTION

POWER WINDOW
Check for continuity between the terminals.
1. There should be continuity between the No.1 terminal in the I/P-K and the No.9 or 10 terminal in the I/P-G when power and ground are connected to the No.1 terminal in the I/P-K and the No.7 terminal in the I/P-D.
2. There should be no continuity between the No.1 terminal in the I/P-K and the No.9 or 10 terminal in the I/P-G when power and ground are connected to the No.1 terminal in the I/P-K and the No.7 terminal in the I/P-D.