Operation CHARM: Car repair manuals for everyone.
Home >> Kia >> 2009 >> Rondo L4-2.4L >> Repair and Diagnosis >> A L L Diagnostic Trouble Codes ( DTC ) >> Testing and Inspection >> B Code Charts >> B1249 >> Monitor Scantool Data
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Monitor Scantool Data





Monitor Scantool Data

1. Connect scantool to Data Link Connector (DLC).
2. Engine "ON".
3. Monitor the "DR DIRECTION POTENTIO" parameter on the scantool. While operating mode switch.




4. Are the DTC B1249 present and is parameter of "DR DIRECTION POTENTIO" fixed ?
** Parameter of "DR DIRECTION POTENTIO" will be fixed at 100% (or any value above 90%) or 0% (or any value below 10%), if there is any fault in DR Direction actuator.
YES
1) Go to "Inspection & Repair" procedure.
NO
1) Fault is intermittent caused by poor contact in the sensor's and/or A/C control unit's connector or was repaired and A/C control unit memory was not cleared.
Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.
pro multis · About Operation CHARM