Transmission Cooler: Service and Repair
Removal
1. Air cleaner assembly and air duct.
2. Remove the ATF Warmer hose (A).
3. Remove the under cover (A).
Tightening torque:
7.8 - 11.7 N.m (0.8 - 1.2 kgf.m, 5.7 - 8.6 lb-ft)
4. Remove the mounting bolt (A) and hose (B).
5. Remove the ATF Warmer (C) after removing the nut (5EA).
Tightening torque:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)
6. Installation is the reverse of removal.
NOTE:
- Adding automatic transaxle fluid. " in this group.)