Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Component Inspection





Engine Control(SULEV)
P0121 Throttle/Pedal Position Sensor/Switch \'A\' Circuit Range/Performance - Inspection/Repair:_:Component Inspection

Component Inspection

1. Select 'Actuation Test' mode and execute 'ETC motor' item.








> During 'ETC Motor' test, TPS1 and TPS2 show symmetrical movements.
2. Is the waveform normal?






NOTE:
It is necessary to perform the TPS adaptation procedure after the ETC assembly or PCM replacing.
TPS adaptation procedure
Ignition "OFF" and then "ON" without cranking. Wait for 10 seconds under enable conditions.
-> Enable conditions : Battery >10V & Intake Air Temp. >5.3°C(41.5°F) & 5.3°C(41.5°F) < Engine CoolantTemp. < 99.8°C(211.6°F)