Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

System Inspection





Engine Control(SULEV)
P0449 Evaporative Emission System-Vent Valve / Solenoid Circuit - Inspection/Repair:_:System Inspection

Canister Air-Filter inspection

1. Disassemble the Canister Air-Filter and hose from their respective positions.
2. Check the Canister air-filter for contamination.
3. Is Canister Air-Filter contaminated with dust?






Canister Close Valve(CCV) Line Inspection

1. Reconnect all EVAP hardware that was previously disconnected.
2. Disconnect hose connecting Canister Closing Valve(CCV) to canister.
3. Ignition "ON" & Engine "OFF"
4. Blow air to the canister side of the valve and verify air escapes to the air filter side.
5. Install GDS and select "CANISTER CLOSE VALVE" on the Actuation Test mode.
6. Activates "CANISTER CLOSE VALVE" by clicking "START" icon.
7. Blow air into hose and verify air does not escape.
8. Repeat this procedure 4 or 5 times to ensure CCV reliability.
9. Is CCV working properly?