Repair Procedures

Replacement

1. Remove the rear wheel & tire.

Tightening torque Nm (kgf.m, lb-ft) :
90 - 110 (9.0 - 11.0, 65 - 80)

2. Loosen the bolts (A).

Tightening torque Nm (kgf.m, lb-ft) :
65 - 75 (6.5 - 7.5, 47 - 54)




3. Loosen the screw (B).




4. Remove the wheel speed sensor cable and the loosening the mounting bolts.

Tightening torque Nm (kgf.m, lb-ft) :
60 - 70 (6.0 - 7.0, 43 - 50)




5. Remove the wheel speed sensor cable and parking brake cable mounting bracket bolts.




6. Remove the rear hub unit bearing.




7. Remove the parking brake cable.




8. Remove the rear shock absorber from the torsion beam axle by loosening the nut.

Tightening torque Nm (kgf.m, lb-ft) :
100 - 120 (10.0 - 12.0, 72 - 87)




9. Remove the torsion axle from the body loosening the bolts.




10. Installation is the reverse of removal.