Operation CHARM: Car repair manuals for everyone.
Home >> Kia >> 2012 >> Optima L4-2.0L Turbo >> Repair and Diagnosis >> Body and Frame >> Locks >> Power Locks >> Power Door Lock Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Door Lock Switch: Service and Repair





Inspection

Driver Door Lock Switch Inspection
1. Disconnect the negative (-) battery terminal.
2. Remove the front door trim panel.

3. Disconnect the connector from the power window switch module.




4. Check for continuity between the terminals in each switch position according to the table.






Removal

1. Disconnect the negative(-) battery terminal.
2. Remove the front door trim panel.

3. Remove the power window switch module (A) from the door trim after loosening the mounting screws (3EA).





NOTE:
- Be careful not to damage door trim panel and door module mounting hooks.

Installation

1. Install the power window switch module.
2. Install the door trim panel after reconnecting the relevant connectors

NOTE:
- Make sure that the power window switch module connectors are plugged properly.
- Check that the power window switch and door lock switch operate normally.

pro multis · About Operation CHARM