Oil Cooler: Service and Repair

Removal

1. Loosen the drain plug, and drain the coolant. Remove the radiator cap to speed draining.
2. Disconnect the oil cooler coolant hoses (A).




3. Remove the oil filter (A).




4. Loosen the mounting bolt (A) and remove the oil cooler assembly (B).






Installation

1. Apply a light coat of engine oil to the oil cooler packing surface (A), and then install the oil cooler with fix bolt (B).

Tightening torque:
44.1 - 53.9 N.m (4.5 - 5.5 kgf.m, 32.5 - 39.8 lb-ft)





CAUTION:
Fix position of oil cooler stopper(A) where oil cooler resists on ladder frame stopper (B).




2. Apply a light coat of engine oil to the oil filter packing surface (A), and then install the oil filter.

Tightening torque:
11.8 - 15.7 N.m (1.2 - 1.6 kgf.m, 8.7 - 11.6 lb-ft)

3. Connect the oil cooler coolant hoses (B).




4. Fill the radiator with coolant and check for leaks.