Rear Assist Arm

Replacement

1. Remove the rear wheel & tire.

Tightening torque:
88.3 - 107.9 N.m(9.0 - 11.0kgf.m, 65.1 - 79.6lb-ft)





CAUTION:
Be careful not to damage the hub bolts when removing the rear wheel & tire.

2. Remove the split pin and castle nut and then disconnect the rear assist arm (A) from the rear axle.

Tightening torque:
44.1 - 53.9N.m(4.5 - 5.5kgf.m, 32.5 - 39.8lb-ft)




3. Loosen the bolt & nut and then remove the rear assist arm (A) from the sub frame.

Tightening torque:
107.9 - 117.7N.m(11.0 - 12.0kgf.m, 79.6 - 86.8lb-ft)




4. Installation is the reverse of removal.

Inspection

1. Check the bushing for wear and deterioration.
2. Check for all bolts and nut.