Power Door Lock Actuator: Testing and Inspection

Inspection

Front Door Lock Actuator and Switch
1. Remove the front door trim.

2. Remove the front door latch.
.
3. Disconnect the connectors from the actuator.




4. Check actuator operation by connecting power and ground according to the table.
Check for continuity between the terminals in each switch position when inserting the key into the door according to the table

NOTE:
To prevent damage to the actuator, apply battery voltage only momentarily.

[Without key (4Pin)]









[With key (6Pin)]









Rear Door Lock Actuator and Switch
1. Remove the rear door trim.

2. Remove the rear door latch.

3. Disconnect the connectors from the actuator.




4. Check actuator operation by connecting power and ground according to the table.
Check for continuity between the terminals in each switch position when inserting the key into the door according to the table

NOTE:
To prevent damage to the actuator, apply battery voltage only momentarily.