Repair Procedures
Removal and Installation
1. Disconnect the front oxygen sensor connector (A) and then remove it from the bracket.
2. Remove the front muffler (A).
3. Remove the rear oxygen sensor (A).
Tightening torque :
39.2 - 49.0 N.m (4.0 - 5.0 kgf.m, 28.9 - 36.2 lb-ft)
4. Remove the catalytic converter and center muffler assembly (A).
Tightening torque :
39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb-ft)
5. Remove the main muffler (A).
6. Installation is the reverse order of removal.
NOTE:
When installing, replace with new gaskets.