Brakes and Traction Control: Service and Repair

CHECK AND TOP UP BRAKE FLUID RESERVOIR





- Visually check the brake fluid level against the 'MIN' and 'MAX' level markings on the side of the reservoir.
- If necessary top up with the recommended grade of fluid. DO NOT OVERFILL.
- Release the cap with combined fluid level switch by rotating counter- clockwise. Withdraw the cap and switch, top up the reservoir.

CAUTION: When topping up the reservoir care should be taken to ensure that the brake fluid does not come into contact with any of the vehicle paintwork. Should this occur, wash the affected area IMMEDIATELY with a large quantity of water.