Cruise Control Servo: Service and Repair

NOTE: The actuator itself is not a serviceable item, in the event of failure or damage fit a new unit.

REMOVE
1. Disconnect the battery negative terminal.

Actuator:

2. Pull the short rubber elbow from the actuator.
3. Remove the nut securing the actuator to the throttle bracketry.
4. Detach the actuator from the bracket and maneuver the actuator operating link off the throttle lever.
5. Withdraw the actuator from the engine compartment.

REFIT
1. Inspect the rubber diaphragm for condition. Fit a new actuator assembly if the diaphragm is in poor condition.
2. Reverse the removal procedure, ensuring that the hook is fitted uppermost.