System Specifications

ELECTRICAL
Alternator mounting bracket to cylinder head 34 Nm (25 ft lb)
Alternator to mounting bracket 24 Nm (17 ft lb)
Alternator to adjusting link 24 Nm (17 ft lb)
Alternator shaft nut 27.2-47.5 Nm (20-35 ft lb)
Alternator through bolts 4.5-6.2 Nm (40-55 ft lb)
Alternator rectifier bolts 3.4-3.96 Nm (30-35 in lb)
Amplifier module screws 1.0-1.4 Nm (9-12 in lb)
Amplifier heat sink screws 1.0-1.2 Nm (9-11 in lb)
Auxiliary driving lamp mounting bolts 13.6-20.4 Nm (10-15 ft lb)
Distributor clamp bolt 19-22 Nm (14-16 ft lb)
Distributor pick-up bearing plate support pillars 1.0-1.2 Nm (9-11 in lb)
Distributor pick-up barrel nuts 1.1-1.5 Nm (10-12 in lb)
Distributor vacuum unit 1.7-2.7 Nm (15-24 in lb)
Spark plug 19-21.7 Nm (14-16 ft lb)
Starter motor to engine bolts 40.6-47.4 Nm (30-35 ft lb)
Starter motor through bolts 6.2 Nm (55 in lb)
Solenoid screws 6.1 Nm (55 in lb)
Solenoid battery terminal nut 4 Nm (35 in lb)
Solenoid starter terminal nut 3.2 Nm (28 in lb)
Reverse light switch 20-27 Nm (15-20 ft lb)
Wiper motor yoke retaining bolts 1.35-1.8 Nm (12-16 in lb)