Fuse Block: Service and Repair
REMOVE1. Disconnect the battery negative lead.
2. Remove the clip-on fuse box cover.
3. Remove the fuses from the main and auxiliary fuse boxes.
4. Remove the single screw securing the top auxiliary fuse box to the fuse box surround.
5. Unclip the opposite end of the fuse box.
6. Remove the two screws securing the main fuse box to the lower center dash panel.
7. Withdraw the auxiliary fuse box surround.
8. Maneuver the main and auxiliary fuse box to enable them to be withdrawn through the fuse box opening.
9. Remove the leads from the fuse boxes, by inserting a small screwdriver into each fuse socket to depress the small retaining tab on the back of the blade connections, withdraw the leads from the rear of the fuse box.
REFIT
1. Reverse the removal instructions ensuring that all leads are refitted to the correct fuse socket.
NOTE: When refitting the leads to the fuse box, the retaining tabs on the back of the blade connectors must be in their raised position to prevent the leads being pushed out of the rear of the fuse box when the fuse is refitted.