Power Mirror Switch: Service and Repair

Exterior Driving Mirrors

Control Switches

Service Repair No - 86.65.75

Remove
1. Disconnect the battery negative lead.

Switch Panel:

2. Carefully pry the switch retaining panel out of the dash panel.
3. Withdraw the panel only as far as the electrical leads will permit.
4. Pull the multi-plug from the rear of the fingertip controlled mirror switch.
5. Disconnect the multi-plug at the rear of the selector switch and remove the panel.
6. Carefully pry off the fingertip button at the operating end of the switch.
7. Unscrew the black plastic retaining collar securing the switch.
8. Remove the switch from the panel noting the position of the locating hole in the panel retaining clip
9. Depress the two spring clips securing the selector switch and push it through the panel.

Refit
1. Reverse operations.