Front

1. Disconnect battery ground cable.
2. Remove wiper arms.
3. Remove locknuts and grommets from wiper arm spindles.
4. Remove hood and deck panel.
5. Remove clips securing wiper arm linkage to spindles and motor crank, then disconnect linkage.
6. Remove lower grommets from spindles.
7. Remove screw securing hood torsion bar bracket and disconnect bracket from torsion bar.
8. Remove remaining screws securing motor and linkage assembly to bulkhead.
9. Remove motor from mounting location and disconnect electrical connector.
10. Remove mounting plate from motor.
11. Reverse procedure to install.