Warranty Code - Manuals Available

Bulletin: G93-012

Section: General

Date: 12/2/93

Model: Defender

Applicable to: USA/CND

Subject:
WARRANTY CODES MANUAL - DEFENDER MODELS

Two Defender Warranty Codes Manuals and one binder have been shipped to your dealership under separate cover. In about three weeks, you will receive two new Range Rover Codes Manuals and a binder. It is suggested that you install a Defender manual and a Range Rover manual in each binder. Also, insert the Fault Description List in the front of each manual.

This manual replaces the manual supplied for the Defender 110 and covers both Defender 90 and 110.

The labor times published in the new manual will become effective on all claims received on or after December 6, 1993.

Paint information for current Defender models will be supplied at a later date. Until that information is available, please refer to the paint section of your Defender 110 manual. The remainder of that manual should be discarded.

Your Parts Account will be billed $35.00 ($55.30 Canadian) for the shipped materials.

REPAIR CODE 4TH DIGIT FOR FAULT DESCRIPTIONS

A Wrongly Adjusted

B Porous/Adrift

C Bad Fit

D Broken

E Cracked/Split/Cut

F Seized/Stiff

G Loose/Weak Synchromesh

H Corroded/Plating Failure

J Worn/Stretched

K Noisy/Chafed

L Judder/Poor Connection

M Body/Coolant Leaks/Burnt

N Leaks Not Coolant Loss

P Difficult Engagement/Dust Entry

Q Faded/Stained/Discolored

R Factory Damage

S Open Circuit/Blocked

T Short Circuit/Thread Damage

U Inaccurate/Slipping

V Bulb/Light Unit Failure

W Vibration/Out of Balance

X Brake Pull/Surface Damage

Y Wrong Part Fitted

Z Inoperative