Seat Base

Seat Base


WARNING: Care must be taken if the seat lifting mechanism is operated when the seat is removed from the base otherwise personal injury could occur.


Remove
1. Remove the seat from the base.
2. Carefully operate the seat mechanism to raise it to the tilt position.







3. Remove the two bolts securing the rear of the base to the floor.
4. Return the seat mechanism to the upright position.
5. Pull the carpet flap forward to expose the front securing bolts, remove the bolts and lift out the seat base.

Refit
6. Reverse removal procedure.

SEAT BASE RUNNERS

Remove
7. Remove the seat from the base.







8. Spring the release handle oft its locations on the runners.
9. Slide the runners forward sufficient to gain access to the rear securing bolts and rearward for the front bolts.
10. Remove the bolts and withdraw the runners.

Refit
11. Fit the runners and release handle.
12. Reverse removal procedure.
13. Refit the seat to the base.