Inspection

1. Remove the terminals from the connector housings to inspect the pin and socket terminals and the quality of the wiring crimps for each listed in the illustration.

2. Cautiously deform each pin and socket to improve connection.

3. Assemble connectors.

4. Use an ohmmeter to verify the continuity between the following:

^ C225 position 11 to C1032 position 22.
^ C225 position 15 to C1017 position 26.

5. Verify that neither circuit is short-circuited to vehicle ground.

6. If the tests verify the circuits and connectors are functioning correctly, perform selection of current immobilization strategy using TestBook.