Distributor: Description and Operation

A Lucas 35DLM8 Distributor is employed. This has a conventional vacuum advance unit and centrifugal automatic advance mechanism.

A pick-up module, in conjunction with a rotating timing reluctor inside distributor body, generates timing,signals. These are applied to an electronic ignition amplifier module mounted on side of distributor body.

NOTE: Pick-up air gap is factory set. Do not adjust gap unless pick-up is being changed or base plate has been moved. Use a non-ferrous feeler gauge to set air gap.

Ignition Distributor Service Parts:

1 Cap
2 HT brush and spring
3 Rotor arm
4 Insulation cover
5 Pick-up module and base plate assembly
6 Vacuum unit
7 Amplifier module
8 'O'-ring oil seal
9 Gasket