Crankshaft Position Sensor: Service and Repair

Service repair no - 18.30.12

Remove


CAUTION: 4.6 litre automatic vehicles have a spacer fitted to the engine speed sensor.


1. Disconnect battery negative lead.
2. Disconnect multiplug from CKP sensor fly-lead.
3. Remove bolt securing CKP sensor connector to bracket.







4. Raise the vehicle.


WARNING: Support on safety stands.


5. Remove 2 bolts securing CKP sensor to cylinder block adaptor plate.







6. Remove CKP sensor.
7. 4.6 litre Automatic Only: Collect spacer from sensor.

Refit
8. 4.6 litre Automatic Only: Fit spacer to CKP sensor.
9. Fit CKP sensor to adaptor plate. Secure with bolts. Tighten to 6 Nm (4 lbf. ft)
10. Remove safety stands. Lower vehicle.
11. Secure CKP sensor connector to bracket with bolt.
12. Connect CKP sensor multiplug.
13. Reconnect battery negative lead.