Operation CHARM: Car repair manuals for everyone.
Home >> Land Rover >> 1995 >> Range Rover SE (LP) V8-4.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Knock Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor: Service and Repair




Service repair no - 18.30.28 - Sensor - LH
Service repair no - 18.30.30 - Sensor - RH


CAUTION: Due to the sensitivity of the sensors, do not apply tape or sealant to sensor threads.


Remove
1. Raise the vehicle.


WARNING: Support on safety stands.


2. RH Sensor Only: Remove starter motor.
3. Disconnect sensor multiplug.
4. Remove sensor from cylinder block.







Refit
5. Ensure sensor location in cylinder block is clean.
6. Fit sensor. Tighten to 16 Nm. (12 lbf. ft)


CAUTION: Failure to tighten sensor to correct torque will result in malfunction or sensor damage.


7. Connect sensor multiplug.
8 RH Sensor Only: Fit starter motor.
9. Remove safety stands. Lower vehicle.
pro multis · About Operation CHARM