Front

70.10.12 - Front disc
70.10.18 - Disc shield


Remove
1. Remove front brake pads.





2. Remove 2 bolts securing caliper.
3. Tie caliper aside, ensuring brake hose is not stressed.





4. Remove screw securing disc, remove disc.
5. Using a wire brush, remove corrosion from mating faces. Clean with a suitable solvent.
6. Remove 3 bolts, remove disc shield.


Refit
7. Fit disc shield, secure with bolts. Tighten to 8 Nm (6 ft. lbs.)
8. Fit brake disc, secure with screw. Tighten to 25 Nm (18 ft. lbs.)
9. Untie brake caliper.
10. Fit brake caliper, secure with bolts. Tighten to 165 Nm (122 ft. lbs.)
11. Fit front brake pads.