Windshield Washer Pump: Service and Repair

Pump - Washer - Screen and Headlamp

Service Repair No - 84.10.21

The following procedure also covers removal of the rear screen washer pump and the headlamp washer pump.

Remove
1. Headlamp washer pump: Remove front bumper.





2. Front and rear screen washer pumps: Remove 7 screws securing LH front wheel arch liner extension to liner and bumper valance and remove liner extension.
3. Position container under washer reservoir to collect fluid spillage.





4. Disconnect multiplug from washer pump.
5. Release clip and disconnect washer hose from washer pump.
6. Remove washer pump from reservoir and remove and discard pump seal.

Refit
1. Use a new seal and fit pump to reservoir.
2. Connect hose to pump and secure with clip.
3. Connect multiplug to pump.
4. Front and rear screen washer pumps: Fit wheel arch liner extension, secure to bumper valance and liner with screws.
5. Headlamp washer pump: Fit front bumper.
6. Fill reservoir with washer fluid.