76.13.28 Trim Finisher - 'B C' Post - Upper - Renew

76.13.28 Trim Finisher - 'B C' Post - Upper - Renew

Remove
1. Remove seat base finisher.





2. Remove Torx bolt securing rear seat belt lower fixing to body and position seat belt aside.
3. Release finisher from 6 retaining clips and remove finisher.

NOTE: Do not carry out further dismantling if component is removed for access only.





4. Remove 6 retaining clips from finisher.
5. Remove seat belt slide.

Refit
1. Fit seat belt slide to finisher.
2. Fit retaining clips to finisher.
3. Position finisher and engage retaining clips.
4. Position seat belt lower mounting, fit Torx bolt and tighten to 40 Nm (29 ft. lbs.).
5. Fit seat base finisher.