Camshaft Position Sensor: Service and Repair

Sensor - Camshaft Position (CMP)

Service Repair No - 18.30.24

Remove
1. Disconnect battery earth lead.
2. Remove engine acoustic cover.





3. Release CMP multiplug from bracket and disconnect multiplug.





4. Remove bolt securing CMP sensor multiplug bracket and release CMP sensor lead from behind bracket.
5. Remove bolt securing CMP sensor to camshaft cover.
6. Remove CMP sensor and discard seal.

Refit
1. Clean CMP sensor and mating face.
2. Lubricate new seal with clean engine oil and fit to CMP sensor.
3. Position CMP sensor, fit and tighten bolt to 8 Nm (6 ft. lbs.).
4. Feed CMP sensor lead behind multiplug bracket, align bracket, fit bolt and tighten to 8 Nm (6 ft. lbs.).
5. Connect CMP sensor multiplug and secure to bracket.
6. Fit engine acoustic cover.
7. Connect battery earth lead.