Trim Casing - Tailgate - Upper

Trim Casing - Tailgate Upper

Service Repair No - 76.34.11

Remove





1. Remove 2 Torx screws securing trim casing to upper tailgate.
2. Carefully release 11 clips securing trim casing to tailgate





3 Disconnect both tailgate lamp multiplugs.
4. Disconnect tailgate latch manual release cable from trim casing.
5. Remove trim casing.

NOTE: Do not carry out further dismantling if component is removed for access only.

6 Remove both lamps and retaining clips from mm casing

Refit
1. Fit lamps and dips to trim casing.
2. Connect both tailgate lamp multiplugs.
3. Connect manual release cable.
4. Fit and secure tailgate trim casing.