Operation CHARM: Car repair manuals for everyone.
Home >> Land Rover >> 2006 >> Range Rover (LM) V8-4.2L SC >> Repair and Diagnosis >> Body and Frame >> Radiator Support >> Service and Repair >> Headlamp Mounting Panel
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Headlamp Mounting Panel



Headlamp Mounting Panel

The headlamp mounting panels are bolted in position, there are no welds to hold them in place.

Remove

1. Remove both headlamp assemblies.
2. Remove LH and RH bonnet locks.
3. Diesel models: Remove fuel cooler air duct.
4. Remove 3 screws securing grille to bonnet locking platform.
5. Remove bolts securing bonnet locking platform and remove platform.
6. LH side: Remove horn.
7. LH side: Remove air intake hose.
8. RH side: Remove front bumper RH support bracket.
9. RH side: Remove windscreen washer reservoir.
10. RH side: Remove PAS fluid cooler.

Repair

1. Remove existing panel(s), prepare panel joint faces and install new panel(s) in accordance with Panel Replacement Procedure.

Refit

1. RH side: Fit PAS fluid cooler.
2. RH side: Fit windscreen washer reservoir.
3. RH side: Fit front bumper RH support bracket.
4. LH side: Fit horn.
5. LH side: Fit air intake hose.
6. Fit and tighten bolts securing bonnet locking platform.
7. Fit 3 screws securing grille to bonnet locking platform.
8. Diesel models: Fit fuel cooler air duct.
9. Fit LH and RH bonnet locks.
10. Fit both headlamp assemblies.
pro multis · About Operation CHARM