Seat Latch: Service and Repair

Latch - Rear Squab

Service repair No - 78.80.05

Remove
1. Remove squab cover and pad from frame.





2. Remove and discard retaining clip securing operating rod to latch assembly.
3. Release operating rod from assembly.
4. Remove 2 Allen bolts securing latch assembly to frame, remove assembly.

Refit
1. Position latch assembly to frame and secure with Allen bolts, tighten to 25 Nm (18 ft. lbs.).
2. Connect operating rod and secure with retaining clip.
3. Fit squab cover and pad to frame.