Operation CHARM: Car repair manuals for everyone.
Home >> Land Rover >> 2007 >> Range Rover (LM) V8-4.2L SC >> Repair and Diagnosis >> Body and Frame >> Seats >> Power Seat Switch >> Service and Repair >> Lumbar Control Switch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Lumbar Control Switch



Lumbar Control Switch

Removal

NOTE: Front seat shown removed for clarity.

1. Position the front seat fully forwards.
2. Remove the safety belt lower anchor bolt cover.
1. Carefully release the clip from behind the front seat base side trim panel.
2. Remove the cover.







3. Carefully release the front seat base side trim panel.
^ Remove the 2 screws.
^ Release the 6 clips.







4. NOTE: Safety belt shown removed for clarity.

Disconnect the lumbar control switch electrical connector.







5. Remove the lumbar control switch.
1. Release the 2 clips.
2. Remove the switch.







Installation

1. Install the lumbar control switch.
^ Install the switch.
^ Secure the 2 clips.

2. Connect the lumbar control switch electrical connector.
3. Carefully install the front seat base side trim panel.
^ Secure the 6 clips.
^ Install the 2 screws.

4. Install the safety belt lower anchor bolt cover.
5. Reposition the front seat to the original position.
pro multis · About Operation CHARM