Operation CHARM: Car repair manuals for everyone.
Home >> Land Rover >> 2007 >> Range Rover (LM) V8-4.2L SC >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Temperature Switch >> Service and Repair >> Seat Control Switch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Control Switch



Seat Control Switch

Removal

NOTE: Front seat shown removed for clarity.

1. Position the front seat fully forwards.
2. Remove the safety belt lower anchor bolt cover.
1. Carefully release the clip from behind the front seat base side trim panel.
2. Remove the cover.







3. CAUTION: Release the 2 front clips and the rear clip before releasing the 3 fir tree clips. Failure to follow this instruction may result in damage to the vehicle.

Carefully release the front seat base side trim panel.
^ Remove the 2 screws.
^ Release the 2 front clips.
^ Release the rear clip.
^ Release the 3 fir tree clips.







4. NOTE: Safety belt shown removed for clarity.

Release the seat control switch.
^ Release the 5 clips.







5. NOTE: Safety belt shown removed for clarity.

Remove the seat control switch.
^ Disconnect the 5 electrical connectors.







Installation

1. Install the seat control switch.
^ Connect the 5 electrical connectors.

2. Secure the seat control switch.
^ Secure the 5 clips.

3. Secure the front seat base side trim panel.
^ Secure the 6 clips.
^ Install the 2 screws.

4. Install the safety belt lower anchor bolt cover.
5. Reposition the front seat to the original position.
pro multis · About Operation CHARM