Operation CHARM: Car repair manuals for everyone.
Home >> Land Rover >> 2007 >> Range Rover (LM) V8-4.2L SC >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Service and Repair >> Removal and Replacement >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation

Transfer Case - 4.2L

Service Repair No - 41.20.25

Installation

1. With assistance, install the transfer case.
Clean the component mating faces.
Lubricate input shaft splines with 'Weicon TL7391' grease.
Install the O-ring seal.
Using the special tool, tighten the bolts to 45 Nm (33 ft. lbs).





2. Connect the breather line.
3. Connect the electrical connectors.
4. Install the transmission support insulator.
Clean the component mating faces.
Tighten the bolts to 60 Nm (44 ft. lbs).
5. Attach the front driveshaft to the transfer case drive flange.
Tighten the new Torx(R) bolts to 45 Nm (33 ft. lbs), then a further 90 degrees.
6. Install the rear driveshaft.
7. Install the transmission support crossmember.
8. Connect the battery ground cable.
9. Use T4 to re-calibrate a new transfer case.
pro multis · About Operation CHARM