Rear Door Window Glass: Service and Repair

Rear Door Window Glass

Service Repair No - 76.31.02

Removal

1. Lower the rear door window glass.
2. Remove the rear door trim panel.
3. Disconnect the door speaker electrical connector.
4. Remove the rear door inner weathershield.
5. Remove the rear door upper trim panel.
^ Release the 2 clips.
^ Disconnect the electrical connector.







6. Remove the rear window glass guide channel.
^ Remove the 3 screws.







7. Remove the rear door window glass.
^ Remove the bolt.







Installation

1. Install the rear door window glass.
^ Install the bolt and tighten to 10 Nm (7 ft. lbs.).

2. Install the rear window glass guide channel.
^ Install the 3 screws.
^ Install the seal.

3. Install the rear door upper trim panel.
^ Connect the electrical connector.

4. Connect the door speaker electrical connector.
5. Install the rear door inner weathershield.
6. Check correct operation of the rear door window glass.
7. Install the rear door trim panel.