Oil Pump: Service and Repair

Active On-Demand Coupling Oil Pump

Service Repair No - 51.30.02

Removal

1. WARNING: Make sure to support the vehicle with axle stands.

Raise the vehicle on the lift.

2. Remove the drive pinion flange.

3.

4. CAUTION: Be prepared to collect escaping oil.

CAUTION: Make sure that the area around the component is clean and free of foreign material.

Discard the O-ring seals.

Installation

1. CAUTION: Only use the specified material to lubricate the seals.

Lubricate the O-ring seals.

2. Install the new O-ring seals.

3. CAUTION: Make sure that the area around the component is clean and free of foreign material.

Install the oil pump.
Torque:
6 Nm

4. Connect the electrical connector.
5. Install the drive flange.
6. Check and top-up the active on-demand coupling fluid level.