Front Door Window Regulator: Service and Repair

Front Door Window Regulator and Motor

Special Service Tools





501-114
Release Lever, Door Glass

Removal

NOTE: If possible, lower the window glass by approximately one third of its travel.

1. Disconnect the battery ground cable.
2. Remove the front door speaker.
3. Carefully remove the outer waist seal.





4. Release the door window glass from the window lift mechanism. Raise the glass and secure it to the top of the door frame.
Special Service Tools: Release Lever, Door Glass





5. Remove the glass guide channel.





6. Remove the front door control module.





7. Remove the window motor and regulator assembly.





Installation

1. Install the window motor and regulator assembly. Tighten the nuts and the bolts.

Torque: 10 Nm

2. Install the door control module.
3. Install the glass guide channel and lining. Tighten the bolt.

Torque: 10 Nm

4. Secure the door window glass to the window lift mechanism.
5. Install the outer waist seal and secure with the Torx screw.
6. Install the front door speaker.
7. Connect the battery ground cable.