Tailgate Interior Trim Panel: Service and Repair

Tailgate Trim Panel

Service Repair No - 76.49.23

Removal

1. Remove the tailgate upper trim panel.
^ Remove the 4 screw covers.
^ Remove the 4 screws.
^ Release the 2 clips.







2. CAUTION: To protect the paintwork, the tailgate must be supported at all times.

Release the 2 support cables from the tailgate.
^ Release the 2 clips.







3. Remove the 2 support cable spigots from the tailgate.
4. Lift the tailgate hinge cover for access.
5. Remove the tailgate trim panel.
^ Release from the 12 clips.







6. NOTE: Do not disassemble further if the component is removed for access only.

Remove the 12 clips from the tailgate trim panel.







Installation

1. Install the tailgate trim panel.
^ Install the clips.

2. Lower the tailgate hinge cover.
3. Tighten the support strut spigot to 25 Nm (18 lb.ft).
4. Position the support cables to the tailgate and secure with the clips.
5. Install the tailgate upper trim panel.
^ Secure with the clips.
^ Install the screws.
^ Install the screw covers.