Fuel Temperature Sensor: Service and Repair

Fuel Temperature Sensor

Service Repair No - 19.22.08

Removal
1. Secure the hood in the service position.
^ Release the support struts.

2. Disconnect the battery ground cable.
3. Remove the engine cover.

CAUTION: Always plug any open connections to prevent contamination.

4. Remove the fuel temperature sensor.
^ Disconnect the electrical connector.
^ Position an absorbent cloth to collect fluid spillage.





Installation
1. To install, reverse the removal procedure.
^ Clean the component mating faces.
^ Apply sealant to the sensor thread.
^ Tighten the sensor to 7 Nm (5 ft. lbs.).