Central Junction Box (CJB)

Central Junction Box (CJB)

Removal
1. If the central junction box (CJB) is to be replaced, connect T4 to the vehicle.
2. Remove the glove compartment.
3. Remove the passenger side closing trim panel.
^ Release the clip.
^ Remove the 2 screws.
^ Disconnect the electrical connector.





4. Remove the CJB.
^ Remove the 2 nuts.
^ Disconnect the 6 electrical connectors.





Installation
1. Install the CJB.
^ Connect the electrical connectors.
^ Tighten the nuts to 10 Nm (7 ft. lbs.).

2. Install the closing trim panel.
^ Connect the electrical connector.
^ Secure the clip.

3. Install the glove compartment.
4. Initiate a new CJB using T4.