Torque Specifications
Torque SpecificationsOil Drain Plug 28 Nm (21 ft. lbs.)
Oil Filler Plug 34 Nm (25 ft. lbs.)
Oil Temperature Sensor 22 Nm (16 ft. lbs.)
Differential Locking Motor++ 10 Nm (7 ft. lbs.)
Differential Front Mounting Bolts 100 Nm (74 ft. lbs.)
Differential Rear Mounting Bolt:
Stage 1 120 Nm (89 ft. lbs.)
Stage 2 Tighten a further 180°
Driveshaft to Rear Axle Drive Flange Bolts*
Stage 1 44 Nm (33 ft. lbs.)
Stage 2 Tighten a further 45°
* New Panchlock Torx bolts must be installed
** New Nuts must be installed
+ Stake nut upon completion of operation
++ Apply sealant, Part No. STC 50550 to flange of locking motor