Operation CHARM: Car repair manuals for everyone.
Home >> Land Rover >> 2009 >> Range Rover (LM) V8-4.2L SC >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Service and Repair >> Removal and Replacement >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation

Transfer Case - 4.2L

Service Repair No - 41.20.25

Installation
1. With assistance, install the transfer case.
^ Clean the component mating faces.
^ Lubricate input shaft splines with 'Weicon TL7391' grease.
^ Install the O-ring seal.
^ Using the special tool, tighten the bolts to 45 Nm (33 ft. lbs.).





2. Connect the breather line.
3. Connect the electrical connectors.
4. Install the transmission support insulator.
^ Clean the component mating faces.
^ Tighten the bolts to 60 Nm (44 ft. lbs.).

5. Attach the front driveshaft to the transfer case drive flange.
^ Tighten the new Torx bolts to 45 Nm (33 ft. lbs.), then a further 90 degrees.

6. Install the rear driveshaft.
7. Install the transmission support crossmember.
8. Connect the battery ground cable.
pro multis · About Operation CHARM