Torque Specifications

Torque Specifications

Variable Camshaft Timing (VCT) Oil Control Solenoid Bolt 10 Nm (7 ft. lbs.)
Knock Sensor (KS) Bolts 20 Nm (15 ft. lbs.)
Crankshaft Position (CKP) Sensor Torx Screw 8 Nm (6 ft. lbs.)
Heated Oxygen Sensor (HO2S)+ 45 Nm (33 ft. lbs.)
RH Catalytic Converter To Exhaust Manifold Bolts* 22 Nm (16 ft. lbs.)
LH Catalytic Converter To Exhaust Manifold Bolts* 22 Nm (16 ft. lbs.)
Mass Air Flow (MAF) Sensor Torx Screws 2 Nm (1.5 ft. lbs.)
Camshaft Position (CMP) Sensor Torx Screw 7 Nm (5 ft. lbs.)
Engine Coolant Temperature (ECT) Sensor 18 Nm (13 ft. lbs.)
Fuel Temperature Sensor++ 7 Nm (5 ft. lbs.)
Catalyst Monitor Sensor+ 45 Nm (33 ft. lbs.)
Catalyst Monitor Sensor Heat Shield Bolts 10 Nm (7 ft. lbs.)
Engine Oil Pressure Sensor 12 Nm (9 ft. lbs.)
ECM Retaining Bolts 1.5 Nm (1.1 ft. lbs.)
MAP Sensor Retaining Bolts 3 Nm (2 ft. lbs.)
Radiator Access Panel Bolts 10 Nm (7 ft. lbs.)
Engine Oil Temperature Sensor 20 Nm (15 ft. lbs.)

+ Apply Suitable High Temperature Anti-seize Compound To Threads Of Sensor
* New Bolts Must Be Installed
++ Apply Anti-seize Lubricant To Threads