Wiper Motor: Service and Repair

Rear Window Wiper Motor

Removal
1 Remove the liftgate trim panel. For additional information, refer to Liftgate Trim Panel Liftgate Trim Panel
2 Remove the rear window wiper arm. For additional information, refer to Rear Wiper Pivot Arm Rear Wiper Pivot Arm




3 Remove the rear window wiper motor.
- Disconnect the electrical connector.
- Release the clip.
- Remove the 3 nuts.




4
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the 3 rubber insulators.
- Remove the metal inserts.

Installation
1 To install, reverse the removal procedure.
- Tighten the nuts to 10 Nm (7 lb.ft).