Wiper Motor Linkage: Service and Repair

Wiper Linkage Assembly

Removal
1 Remove the cowl panel grille. For additional information, refer to Cowl Panel Grille Service and Repair
2 Remove the plenum chamber. For additional information, refer to Plenum Chamber Service and Repair




3 Disconnect the windshield wiper motor electrical connector.
4 Remove the windshield wiper assembly.
- Remove the 5 bolts.

Installation
1 Install the windshield wiper motor assembly.
- Tighten the bolts to 10 Nm (7 lb.ft).
2 Connect the windshield wiper motor electrical connector.
3 Install the plenum chamber. For additional information, refer to Plenum Chamber Service and Repair
4 Install the cowl panel grille. For additional information, refer to Cowl Panel Grille Service and Repair