Maintenance Required Lamp/Indicator: Service and Repair

There are two ways of resetting the service interval indicator. An approved Land Rover diagnostic system can be connected to the vehicle and a diagnostic routine performed or a manual reset procedure can be performed using the trip reset button on the instrument cluster.

Manual Reset Procedure

A. Press and hold the trip reset button.

B. Turn the ignition switch on to the ignition position II.

C. If the SII function is enabled the information display will flash "SERVICE" for 5 seconds and then display "SERVICE" constantly. If the SII function is not enabled the information display will show the normal odometer and trip information.

D. If the trip reset button is released within 10 seconds of entering the reset mode, the information display will show "DIST".

1. If the trip reset button is not released after 10 seconds the instrument cluster will exit the manual reset procedure.

E. If the oil service value is to be reset, press the trip reset button within 10 seconds of releasing it and hold for more than 5 seconds. The information display will show "RST" for 5 seconds and then reset the oil service value, the display will then show "END".

F. If the trip reset button is pressed for 5 seconds the display will exit the reset routine.

G. If the trip reset button is not pressed for more than 10 seconds, then the information display will exit the reset routine.