Repair Procedure Steps 39 - 44
39. Install the radiator seal (upper side).
Seal Packing: P/N 36867-60040
A. Fit the upper seal to the lower position of radiator installation boss before attaching as shown in the illustration.
B. Attach to the front side.
NOTE:
Do NOT damage the radiator fins.
40. Install the radiator seal packing (lower side).
Seal Packing: P/N 36867-60040
A. Fit the lower seal to the end of radiator side before attaching as shown in the illustration.
B. Attach to the front side.
NOTE:
Do NOT damage the radiator fins.
41. Install the seal packing between the radiator.
NOTE:
- If the seal is already installed in this location, do NOT perform this step.
Seal Packing: P/N 88578-60330 (30 x 15 x 720mm)
42. Resecure the radiator to the vehicle.
NOTE:
Do NOT damage the radiator fins.
Tighten the 4 bolts.
Torque: 18 N-m (184 kgf-cm, 159 in.-lbf)
43. Install the A/C condenser.
Carefully slide the condenser core up into place and support the condenser to avoid any damage to the fins or condenser and radiator assembly.
Core Condenser: P/N 88461-60111
44. Install the brackets to the condenser and install the condenser assembly to the vehicle.
A. Install the 4 condenser brackets to the condenser.
Torque: 5.4 N-m (55 kgf-cm, 48 in.-lbf)
NOTE:
Install the brackets removed in step 23.
B. Install the condenser assembly to the vehicle.